Evolution of precursor powders prepared by oxalate freeze drying towards high performance Bi-2212 wires

Bi₂Sr₂CaCu₂O_x (Bi-2212) precursor powders were synthesized by the oxalate freeze drying (OFD) method. In comparison with the traditional method, the novel method could shorten the processing steps and thus improve the fabrication efficiency of precursor powder. The phase, microstructure and superconducting properties of Bi-2212 precursor powders and wires were characterized by X-ray diffraction, scanning electron microscopy and four-probe method, respectively. The thermal behavior, surface area and particle size of powders were also discussed. The results indicated that large surface area and small particle size might improve the reactivity and uniformity of powders. These properties were beneficial for the rapid and homogeneous formation of Bi-2212. High-purity crystallized Bi-2212 powders without Bi-2201 and alkaline-earth cuprates phases could be achieved. Furthermore, multi-filamentary Bi-2212 wires with OFD powders showed good microstructures without noticeable pores and large secondary particles. Therefore, high engineering critical current densities (J_e) of 1619 A/mm² and critical current densities (J_c) of 7039 A/mm² were obtained in Bi-2212 wires at 4.2K, self field. It indicated that the oxalate freeze drying method would be a potential candidate for the mass production of high performance Bi-2212 wires.     

Impact of bismuth oxide on the structure,optical features and ligand field parameters of borosilicate glasses doped with nickel oxide

Understanding the impact of bismuth cations on the optical properties of borosilicate glass is significant for manipulating borate glass applications. In this paper, the influence of bismuth cations on both structural and optical properties of borosilicate glass doped with NiO was investigated. Different glass samples, containing different amounts of Bi₂O₃ and a constant amount of NiO, were prepared and studied. Infrared (IR) analysis was carried out to study the internal structure within the investigated glass samples. Optical absorption studies were performed to investigate the impact of Bi₂O₃ content on optical properties of the BiBaNiB-glasses. Astonishingly, with Bi₂O₃ addition, an absorption band at 380 nm has appeared. Moreover, this band is overlapped with the Urbach edge; which regularly produced an artificial edge-like feature at ~450 nm. A detailed deconvolution protocol has been implemented for an appropriate understanding of these spectra and unraveling the hidden Urbach edge. Optical band gap energy, linear and nonlinear refractive index for each BiBaNiB sample were calculated. Furthermore, the metallization criterion was calculated to examine the metallic or insulating nature of the BiBaNiB-glasses. The values of the nonlinear third-order susceptibility and nonlinear refractive index were increased with Bi₂O₃ doping. The BiBaNiB-glasses exhibited outstanding stability and optical band gap than the pristine glass sample, which makes it possible for practical applications.     

Ceramic Powder Bed Laser Sintering (CPBLS) on copper-doped hydroxyapatite: Creation of thin (5–50 μm thick) consolidated ceramic patterns

Implants made of ceramics, and more particularly of calcium phosphates (hydroxyapatite: HA, mainly), promoting intimate contact with natural bone are nowadays merging. Addition of copper ions in bio-ceramics is expected to increase the biological compatibilities of bone graft substitutes. Previous works have shown that copper-doped hydroxyapatite (Cu-doped HA) ceramics can be prepared by solid-state sintering between HA and CuO powder mixtures at about 1100 °C; but, copper-substituted HA was found to be metastable leading to apatitic grains and Cu-rich grain boundaries during the sintering process. Ultra-rapid sintering is so needed. Selective laser sintering (SLS) is an additive manufacturing process that possesses the advantage to be based on ultra-fast sintering process under laser irradiation. SLS being used in literature for the application of laser on polymer-ceramic or poymer-metal composites the proper term all along the paper is Ceramic Powder Bed Laser Sintering (CPBLS). To achieve densification of Cu-doped HA ceramics from CPBLS process, one should control the composition/morphology/structure of the powder bed as well as three other important CPBLS parameters: (i) the applied energy from the laser beam, (ii) the laser power and the laser scanning speed, (iii) the distance between two successive lased lines. In this paper, the impact of all the main CPBLS parameters controlling the sintering of dip-coated Cu-doped HA layers on glass substrates is carefully investigated. Possibility of the creation of thin consolidated Cu-doped HA ceramic patterns, using the ultra-fast CPBLS process, is finally shown.     

Phase Composition and Physico-Mechanical Properties at Different Firing Temperatures of Ceramic Earthquake-Resistant Bricks with the Use of Ferro-Dust

Glass and Ceramics - Ceramic bricks based on low-melting clay and ferro-dust from self-disintegrating, low-carbon, ferrochrome slags, graded from M100 to M175, respectively, were obtained in the...     

Deepening our understanding of bioactive glass crystallization using TEM and 3D nano-CT

One key issue influencing a broader application of Bioglass 45S5 in tissue engineering is its inherent crystallization tendency, severely limiting the mechanical strength of 3D porous scaffolds. Despite numerous studies, Bioglass 45S5 crystallization is not yet fully understood with regard to the mechanisms involved or morphology of the crystal phases forming. Here we show how two cutting-edge imaging techniques, state-of-the-art transmission electron microscopy (TEM) with image correction including energy dispersive X-ray spectroscopy and X-ray nano-computed tomography (nano-CT), allowed us to visualize changes in microstructure from near-nucleation to almost full crystallization in bulk Bioglass 45S5. At early times of heat treatment at 660 °C the formation of phase-separated nano-droplets within the glassy matrix was observed. Later, besides surface crystallization, bulk crystallization of combeite spheres was predominant. The formation of the first combeite spheres, their coarsening with time and finally their merging at near full crystallization were recorded by in situ high-temperature optical microscopy videos. The 3D nature of these spheres was confirmed by nano-CT, while TEM showed that their internal structure was composed of sub-micron grains. X-ray diffraction analysis at early time points showed a much higher crystalline fraction in bulk samples compared to powder samples, highlighting the influence of processing and sample morphology. These results show the importance of using complementary techniques for gaining insight into the crystallization process in the volume. In addition, we show that TEM and nano-CT are suitable characterization techniques to visualize the crystallization even in fast crystallizing systems, such as bioactive glasses.     

Process Flow Diagrams of Cryogenic Double-Wall Tanks for LNG Storage

Chemical and Petroleum Engineering - Three process flow diagrams of vacuum insulated cryogenic double-walled LNG storage tanks are analyzed. The aim of the research is to exclude the spillage of...     

Developing Quality Scores for Auto Dealerships in a Service Network

Russian Engineering Research - The development of quality scores for remote digital assessment of enterprises in an automaker’s dealer network are developed.     

Strain mediated enhancement in magnetoelectric properties of sonochemically synthesized piezoelectric and piezomagnetic composites

Materials with magneto-electric (ME) properties are of great importance because of their demand in electronic industries. Three dimensional nano-particles of the ME-composites having the general formula (1-x)CoCr_0.3Fe_1.7O₄(CCFO)+(x)BaTiO₃(BTO) (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) were obtained by comprising the piezoelectric-BTO and piezomagnetic-CCFO phases. The individual phases of CCFO and BTO were synthesized separately by ultrasonic irradiation assisted sonochemical and sol-gel routs. X-ray diffraction patterns (XRD) confirmed the well-crystalline nature of both the phases. BTO and CCFO phases were under tensile strain as confirmed by the variation in lattice constants with varying proportion of BTO and CCFO. An energy-dispersive X-ray spectroscopy spectrum confirmed the phase purity of the samples and stoichiometric concentration of elements. Magnetic properties were investigated by M ? H loop measurements and dielectric properties by using RF impedance analyzer. Dielectric constant increased with the increasing percentage of BTO. The maximum value of ME coefficient (24.7 mV/cm?Oe) is observed for the 60%CCFO+40%BTO sample. The obtained results were discussed in the light of grain size, strain and the basic properties of the individual phases. The prepared materials can be applicable in electronic devices where high magneto-electric coefficient is desirable.     

Confounding Roles of ER Stress and the Unfolded Protein Response in Skeletal Muscle Atrophy

Skeletal muscle is an essential organ, responsible for many physiological functions such as breathing, locomotion, postural maintenance, thermoregulation, and metabolism. Interestingly, skeletal muscle is a highly plastic tissue, capable of adapting to anabolic and catabolic stimuli. Skeletal muscle contains a specialized smooth endoplasmic reticulum (ER), known as the sarcoplasmic reticulum, composed of an extensive network of tubules. In addition to the role of folding and trafficking proteins within the cell, this specialized organelle is responsible for the regulated release of calcium ions (Ca²⁺) into the cytoplasm to trigger a muscle contraction. Under various stimuli, such as exercise, hypoxia, imbalances in calcium levels, ER homeostasis is disturbed and the amount of misfolded and/or unfolded proteins accumulates in the ER. This accumulation of misfolded/unfolded protein causes ER stress and leads to the activation of the unfolded protein response (UPR). Interestingly, the role of the UPR in skeletal muscle has only just begun to be elucidated. Accumulating evidence suggests that ER stress and UPR markers are drastically induced in various catabolic stimuli including cachexia, denervation, nutrient deprivation, aging, and disease. Evidence indicates some of these molecules appear to be aiding the skeletal muscle in regaining homeostasis whereas others demonstrate the ability to drive the atrophy. Continued investigations into the individual molecules of this complex pathway are necessary to fully understand the mechanisms.     

Laser Writing of Crystalline Structures in Lithium-Niobium-Germanate Glasses

Glass and Ceramics - It is demonstrated that spatially selective crystallization of lithium-niobium-germanate glasses with the compositions (mol.%) 25Li2O?30Nb2O5?45GeO2 and...